Touch static electricity eliminator is also a human body static electricity eliminator. With the rapid development of industrial economy, the elimination of static electricity is becoming increasingly important, and it is also an important link that we cannot ignore. The human body electrostatic eliminator uses a passive circuit that utilizes static electricity on the human body to make the circuit work, thereby achieving the effect of eliminating static electricity. Its characteristics are: small size, light weight. No power supply is required. Easy installation. Features such as no sensation when eliminating static electricity.
Medical research has confirmed that static electricity accumulation in the human body is harmful to health: some people have symptoms such as skin allergies, heart rhythm disorders, headaches, insomnia, and irritability, while others have bristling hair, mental tension, and fear of contacting metal objects. In addition, touching the computer while a person is storing static electricity can cause significant hazards such as computer crash, breakdown of electronic components, ignition and explosion of flammable gases.
The appearance of a touch type electrostatic eliminator is made of stainless steel tubes and stainless steel balls. It is suitable for flammable and explosive places such as chemical, metallurgical, military, oil fields, fireworks, computer rooms, high-end hotels, high-end hotels, and high-end offices. The principle of the circuit is basically the same as that of others, and its main feature is that it can work normally at - 50~100 ℃.
Technical indicators
1) Human electrostatic voltage: V ≤ 20KV
2) Electrostatic discharge time: t ≤ 100mS
3) Large release current: I ≤ 0.1mA
4) Ambient temperature: 20 ℃
5) Ambient humidity: ≤ 80% (40 ℃)
Test conditions and results
Human electrostatic voltage: 18KV Ambient temperature: 20 ℃
Five Finger Release Time
0.09s
Residual voltage - 10V
Five Finger Release Time
-
0.09s
Residual voltage - 10V
Palm release time
0.08s
Residual voltage - 9V
Palm release time
-
0.08s
Residual voltage - 9V
Static elimination time meets ESD standards
Installation and use methods:
1. Base type static electricity elimination ball: First connect the ground wire to the screw thread (the ground wire is easily connected to the lead wire of the ground wire with a plurality of wires of no less than 0.3 square meters). There is a small hole in the ball socket, and connect the ball column to the base. After installation, if there is static electricity in the body, just touch the metal ball above with your finger for 0.1s to eliminate static electricity from the human body. (The indicator light turns on and goes out, which is obvious at night and not obvious during the day.) )If the static electricity in the body is less than 100V or there is no static electricity, the static electricity indicator does not light up.,
2. Baseless static electricity elimination ball: First, bury one end of the ball static electricity eliminator in the ground for at least 200mm, and the other end of the ball is facing upward. This completes the installation. The other parameters are the same as above.
3. Iron plate fixed human static electricity elimination ball: The iron plate is generally fixed by a square stainless steel plate with a thickness of 3-4 mm and a length and width of 130 mm. There are holes in the four corners of the stainless steel plate for fixation.
Maintenance:
No debris, especially metal objects, should enter the steel pipe, as there are circuit elements inside, and if they enter the metal objects, the circuit cannot work properly.
Dongguan Boyou Industrial Investment Co., Ltd. Address: Creative Industry Park, Dalang Town, Dongguan City Contact: Manager Ning 13712014858 Service hotline: Mr. Xu 1392295509 0769-3337-3888 0769-33392777 0769-82207589 website:www.boyouesd.com